Storage Tanks FRP storage tanks manufactured by us are suitable for storage for Hydrochloric Acid and other corrosive chemicals. The largest tank manufactured by us till date has a capacity of 2,50,000 litres. It has a diameter of 6400 mm and height of 9000 mm. We design and manufacture both vertical and horizontal tanks for both over ground and underground installations. Following codes such as BSS and ASTM for the design & product engineering has leveraged the product quality & market position. The tanks can be made either by hand lay-up or on filament winding machines

Blowers We manufacture our own make of FRP Centrifugal blowers in capacity range from 500 CMH to 60000 CMH and static heads ranging from 50 mm to 750 mm water column.

Gas Absorption Plants Optimizing on our new-generation product development facility, we manufacture and supply Gas Absorption System for emission control of any toxic gas like NH3, HCl, HF, NOx, SO2, Cl2, Hbr, Br2, H2S, HCN, HCHO etc. These pollution control systems are manufactured in according to set industrial pollution control parameters. Their compliance with requisite standards have made them reliable in the industry. All our products are quality tested & we ensure to deliver certified air pollution control systems.

Fume Extraction System for Pickling Plants Steel pickling plants are mainly of two types viz. (1) Continuous pickling lines of the closed type for strips and wires and (2) Batch pickling lines of the open type for wire coils, straight tube bundles, automobile bodies (surface pretreatment prior to painting) etc. Induced draft type fume extraction systems are adopted for the former and push-pull type systems are used for the latter. The surface treatment solutions could be hydrochloric acid, sulfuric acid, hydrofluoric acid, nitric acid, chromic acid or any other at various concentrations a

Mixing Reaction Vessels with Agitator Assembly Vessels with agitation require special considerations in design. Agitation produces dynamic loading. The rotating speed of the agitator and natural frequency of the system as a whole have to be taken into account for the design to avoid failures. We specialize in the design of agitated vessels.