Fuel Injector Sleeves Premium grade non ferrous i.e Brass and Copper tubes are used for manufacturing of injection sleeves Wall thickness accuracy is maintained with due care in order to avoid the problems of salvage. Degree and radius Profile is matched on the profile projector Can develop any type of injection sleeves as per customer drawings or samples Option of rubber seal is also provided for the types of injection sleeves with seals.

Interlocking Liners/sleeves are most suitable iron cylinders for aluminum engine blocks The best surface finish for sticking outer surface of the sleeve with the engine blockbecause of specific limits of bonds on the surface. Cost effecting sleeves because of removal of outer diameter machining and saving ofmaterial for machining clearance. Thin walled engine sleeves ultimately helps to reduce the distance between two cylinder bores and helps to increase the efficiency of the engine. Manufacturing through centrifugal casting process to achieve the be

Premium grade non ferrous i.e Brass and Copper tubes are used for manufacturing of injection sleeves Wall thickness accuracy is maintained with due care in order to avoid the problems of salvage. Can develop any type of injection sleeves as per customer drawings or samples Option of rubber seal is also provided for the types of injection sleeves with seals. Caterpillar 3126,C10, C121, 3156,3114,3316,3126,3176, and 3406E.

Original quality centrifugally cast Cylinder liners with precise machining High profile plateau Honing and Cylindrical Grinding to match geometrical parameters Manufactured with BS4K6 material standard with chromium and nickel elements Stringent Material and microstructure analysis of each batch 100% dimensional inspection in process and finished components Random inspection of honing angle and structure and surface roughness Random periodic tests on profiles, tensile strength and crack detection 25 years of manufacturing experience and

Premium quality pressure die cast Aluminum Pistons and Cast as well as forged rings manufactured under stringent supervision. In house production of Centrifugally cast Ni resistant Rings. Material Standard LM 13 for Pistons and S G Iron and stainless steel Rings Material analysis, Pressure test, Tensile and Fatigue tests, Hardness, Thermal shock and expansion and profile tests are carried out for pistons and Rings. Piston Pins are manufactured with 20 Mn Cr5 material with hardening process to achieve the case hardness of 52-58 Hrc Wide Range av