Dehumidifier Introduction : “Classic” make Dehumidifiers are designed and fabricated for economic way to create Dry Air with positive humidity to suit various I.S. standards application in the growing field of Medical, Packing Room, Processing industries, Printing & Lithography, Photographic industries, Equipment room, Computer and Data storage rooms and various Industries. Features : a) Dehumidification Range 30% down to ambient or max. up to 30% R.H. Specifications : The Water Condensing type Dehumidifier pulls the water out of musty air

A refrigerated dehumidifier maintains the humidity levels in the desired tolerance levels.

DEHUMIDIFIER with Refrigerant or Desiccant Rotor Bed technology. For Low RH below 50% Rotor Bed technology is most result oriented compared to any other technologies. With state-of-the-art knowledge Rotor Beds are built to achieve optimum performance. We have got prestigious ISO 9001: 2000 certification, also we are SSI registered company.

We manufacture high quality De- Humidifier with minimal error rate and the most competitive market prices which are specially used in pharma companies. We have installed these systems in pharma, plastic, chemical, storage and paper industries which in return have awarded us a great experience. Our extremely professional team works out air flow, air changes, moisture generation due to various sources and suggests you the best system suitable for extreme moisture conditions in monsoon. These De humidifier ensures long and a flawless life which delivers satisfactory results to clients.

Vertical Dehumidifier

HEAVY DUTY OF INDUSTRIAL DEHUMIDIFIER.

THE AIR DEHUMIDIFIER FOR MOULDS IS A COMPLETELY INDEPENDENT SYSTEM WITH COOLING CYCLE FOR THE COOLING AND DEHUMIDIFYING OF THE AIR AROUND THE MOULD AREA. THE SYSTEM IS COMPLETELY AUTOMATIC. IT ADJUSTS ITSELF DEPENDING ON THE ROOM HUMIDITY AND SENDS AIR TO THE MOULD SURFACE WITH A "DEW POINT" OT +4 DEGREE CELSIUS. THE GREAT ADVANTAGE OF THIS SYSTEM IS THE ABSOLUTE INDEPENDENCE OF OPERATION WHICH DOES NOT REQUIRE THE REPLACEMENT AND/ OR REGENERATION OF DEHYDRATING SUBSTANCE, WHICH INVOLVE HIGHER MANAGEMENT COSTS AND GREATER ENERGY CONSUMPTION. THERE IS ALSO AN ENERGY SAVING BECAUSE PART OF THE DEHUMIDIFIED AIR (ABOUT 30%) IS RECYCLED, ALLOWING AN IMPROVEMENT OF THE MICRO CLIMATE AROUND THE MOULD AND THE ROBOT. THE APPLIANCE IS CONTROLLED BY A SYSTEM WITH TWO SET POINT TEMPERATURE AND HUMIDITY CONTROLLER WHICH KEEPS THE "DEW POINT" VALUE OF THE OUTGOING AIR AUTOMATICALLY STARTING FROM THE MAXIMUM VALUES +35 DEGREE CELSIUS AND R.H. 80%.

* Portable unit based on Refrigeration Principles. * Water removal 0.25 to 5 ltrs / hr. * Available 1, 1.5 & 2 ton. * Humidistat to control Humidity. * M.S Powder Coat finish / Full S. Steel Version. * High Efficient Refrigeration System. (CFC Free Optional)

Mongia Dehumidifier is the prime name and the last word to control humidity. Dehumidifier can be used in any small area, where humidity control is essential. Mongia Dehumidifier's are suitable for area, with 4-5 person occupancy in a well conditioned air lock room. With wall properly painted/treated to minimum moisture Oozing through walls. Mongia Dehumidifier are available in vertical model which save valuable floor space in conditioned room. TYPICAL APPLICATIONS: � Pharmaceutical Mfg. Room, Granulation, Tablet coating, stripping, blister room. Capsule section, dry powder filling etc. � Processing unit to avoid packaging problems of snack foods, biscuits, potato chips, wafers, pan masala, kitchen masala etc. � Printing & Lithography. � Paper storage room/Library. � Photographic Industries. � Communication/Computer storage room. � Wood seasoning and in so many similar Industries.

DEHMUDIFIER TO REMOVE HUMIDITY FROM THE CAPSULE SECTION THE MACHINES IS FITTED WITH REPUTED BRAND COMPRESSOR INCORPORATES HEAT EXCHANGING COILS, WATER CONDENSING COIL, FAN MOTOR ASSEMBLY, WATER COLLECTING TANK MOUNTED ON TROLLY WITH CASTORS, SUITABLE FOR CAPSULE SECTION. CAPACITY : AVAILABLE IN 1 TONNE

Capacity: 1000 M3/hr to 2000 M3/hr Most molded products, whether injection molded, blow molded or vacuum formed (thermoformed) products are cooled by chilled water in mold cavities. The cooling time, which normally is the longest part of the total cycle time and the molding process, is an expensive and an important part of the manufacturing process. Lowering the chilled water temperature in the mold leads to a shreter cycle time. Requirement of Process : To have dry air at lower temperature than the ambient temperature at desire flow to prevent mold sweating on mold surface. Advantage : Reduce cycle time and avoid mould sweating.

SANTHA ENGINEERING we established our brand SCANAIR is engaged in the manufacture of refrigeration equipment since 1996. The soul purpose of its existence is to provide thermal solution to the industry, over the years. Scan air has gathered a spectrum of knowledge with regard to application of the cooling systems in various industries. We have various models and capacities in every product to suit specific requirement of customer needs. Ideal and most suited for a wide spectrum of applications in industries like plastic injection molding, pouch filling machine, blister packing machine, induction hardening machine, high frequency welding machine, electro plating, anodizing, milk dairy, bakery, soft drinks, soda industries, printing equipments, pressure die casting, chemical reactor jacket cooling.

We offer dehumidifiers, which are used for the indoor environment improvement of the buildings such as homes, libraries, hospitals, etc. Dehumidifiers are also effective for quick reducing of relative humidity in an enclosed chamber. These dehumidifiers are also effective for improving the environments of rooms having sensitive electronic equipment such as servers, etc. Dehumidifiers are also effective to dry out damp basements after a rainstorm. We offer Manufacturers And Exports of Panel Air Conditioner, Oil Chiller, Water Chiller, Water Cooler, Air Drier, De-Humidifier, Air Conditioner, Cold Storage/Room