State of art microcontroller design for precise timing LED display for elapsed time indication External reset signal, program enable and disable facility Hold/Restart facility during power failure conditions. Dimensions: 96�96�110mm (W�H�D)

Master Slave Clocks are one of the most advanced products that our company has offering. They can be easily synchronized and are user friendly. Applications • Railway or Bus Stations • Examination Halls in Educational Institutions • Banks and Offices • Factories etc.

Timer We fabricate high quality Electronic Timer. Which is fully compatible with fully automatic Startdelta Starter and other electrical panel and Switches. We are manufacturing timer up to 0 second to 180 seconds.

Typical Application : Used to switch off lights / device after set time from switch- on . It is used for toilets / bathrooms / or any area in industry or home which is less frequented and people have a tendency to forget to switch off. Specification : upto 500W , 230 V , 50 Hz , Single phase. Nob for setting 0- 30 minutes dalay for switching off the device/ light. Working Principle : Once the push button is pressed, it switches on the device/ lights. User can set a time dalay for switching off. Before it switches off the device , if user presses the button once again, it resets

We are manufacturers of Temperature Controllers, Timers, Counters, Impulse sealers. We also trade in Electrical switch gears, Electronic instruments, detectors, spare parts etc.

Timer Display : 4 / 6 digit Single / Dual. Settings : Membrane Keyboard. Ranges : Various from 0.01 sec to 9999 hrs. Resolution : Minimum 1 mSec possible. Count mode : Up / Down. Output : Upto 4 Relays. More relays possible externally. Battery Backup : Optional. Other Options : RS232 / Modbus Connectivity / Real Time operation. On/Off Timers l Cyclic Timers l On / Off Delay Timers One Shot Timers l Sequential Timers Timers with Totalisers l Timers with Counter l Timers with Real Time.

TM - 621 : - Specifications : - One Channel 6 On / 6 Off. On / Off / Auto Temporary Override 24-Hour Digital Timer Power Supply : Line Voltage, 24, 110, 220 (240) Vac, 12, 24 Vdc. Contact rating : 620/620L. 16A(8A)/250V,0.5HP / 250V. 620H:20A(10A)250V,2HP / 250V Own Consumption : 7VA. Programming Resolution : 1 Minute Timing Resolution : 1 Second.

TM 100A Features Interfaces with conversion front panels to replace popular industry tap changer controls. Serial communication ports with several on-board communication protocols. Two active serial communication ports, through RS-232 & RS-485. Technical Specifications

We at Best Systems & Services offer basic electronic equipments that are simple, sleek, reliable & cost effective. We manufacture from basic timer & counter to micro-controller based flow integrator totalizer, batch counter & pressure transmitter. We offer: * Process Indicator * Batch Counters * Time Totalizer * Alarm Annunciator * Production Counters * Electronic Timers Digital Panel Meters : * Digital Counters & Pre Settable Counters * Digital Timers & Cyclic Timers * Sequential Timers * Digital Temperature Indicators & Scanners * Digital Process Indicators * Proximity Switches * Photo Sensors * SMPs Power Supply * Optical Encoders * Laser Sensors * Other Special Sensors * Digital Timer * Digital Programmable Timer * Digital Timer Totalizer * Digital Cyclic Timer * Digital Time Internal Counter * Digital Counter * Digital Even Counter (Up to 6 Digits) * Digital Preset Counter (Unto 6 Digits) * Digital Programmable Counter (6 Digits) * Digital Batch Counter * Digital Length Counter * Digital RPM counter (Tachometer) Timer & Counters * Panel mounted ABS moulded Cabinets * Size 96x96mm, 72x72mm and 48x96mm * Red LED display * Up/down counting * Manual / Auto reset * Input: Proximity sensor / Encoder / Micro switch

We offer Digital Timers with the following product specification:- * Range : 909,99,Sec / Min in two digit , 99.9,999,Sec / Min. in three digit * Output : 2C / 0.6,Amp relay * Size : 48 (H) x 96 (W) x 110,72(H) x 72(W) x 110, 96(H) x 96(W) x 110 Application : Plastic processing machinery, laboratory testing equipment, oven & furnace . Packaging machine, Textile processing machinery. For any further information feel free to contact us.

Application: * Glow sign Board/Boxes * Outdoor Lighting * Decorative Lighting * Hoarding Lighting * Garden Lighting * Street Lights etc., Features: * Complete intelligent controls * Save up to 30% power * No light Dependant sensor (LDR) * Switches on and off on set time * Safety against voltage fluctuations * RTC - universal real time clock product * Micro controller based product * Up to 5 ON/OFF timer per day

We offer a wide range of count down timer , that is used as devices for controlling traffic. This consists of a standard pedestrian signal with standard shapes and color, with an added display that shows the countdown of the remaining crossing time. The countdown timer starts either at the beginning of the pedestrian phase . The timer continues counting down through the pedestrian clearance interval. At the end of the pedestrian clearance interval, the countdown device displays a zero and the “DON'T WALK” indication . Objective : To provide information to pedestrians about how much time is left to cross the street at signalized intersections. Applications : This treatment is useful under the following conditions: * Pedestrian clearance interval greater than 15 seconds * High pedestrian volumes * High levels of vehicular traffic conflicting with pedestrians * Presence of mobility-impaired pedestrians * School zones

Our delay timer is available from 1 sec to 60 minutes timings in 10 steps with a choice of ON/OFF delay. The timer is suitable for continuous working in railway signaling and indoor use. Two change-over un-energized contacts with 5 Amps rating are provided on DIN rail 35mm enclosure.

Supply Voltage: 230v AC Output: 1 Set Of C/O Contacts, Rating 230v, 5A Door Cutout: 92 X 92 MM. Timing Accuracy: 3% of Full Scale Available Ranges: 0-10, 20, 30, 60, 120, 180 Second, Minute/Hours

� Panel cutout 90 x 90 mm. � Six (6) digit display, 8mm LED � Supply -110V/230V,50Hz, 5VA/12 to 24 V DC,100 mA � Preset in SET mode for each digit up to 4 levels � Reset, (remote optional) � Range - Hours and tenth� Minutes and tenth � Seconds and tenth � Output-up to 8 pairs of potential free contacts ( 230V/6A, 50 Hz, open collector) � Memory- Last count 72 hours.

HIGH QUALITY OF DIGITAL TIMERS.

UNIVERSAL PROGRAMMABLE TIMER

RANGE : * PHASE CONTROL THYRISTORS : UP TO 7000 MAP X 4500 VOLTS. * FAST-SWITCHING DISTRIBUTED GATE THYRISTORS : UP TO 3800 AMP X 4500 VOLTS. * RECTIFIER DIODES : UP TO 8400 AMP X 6000 VOLTS. * FAST RECOVERY DIODES : UP TO 2400 AMP X 6000 VOLTS. * GATE TURN OFF THYRISTORS (GTO) : UP TO 4000 AMP X 6000 VOLTS. * MEDIUM VOLTAGE THYRISTORS : UP TO 3700 AMP X 6500 VOLTS. * PULSE THYRISTORS : UP TO 8000 AMP X 4500 VOLTS. * PRESS PACK IGBT DEVICES : UP TO 1500 AMP X 5200 VOLTS. * IGBT GATE DRIVES. * SILICON POWER ASSEMBLIES SINGLE AND MULTI-PHASE BRIGADES AC SWITCHES AND REGULATORS PULE POWER ASSEMBLIES IGBT BRIDGES.

FEATURES : * DIGITAL DISPLAY FOR SET VALUE AND PROCESS VALUE WITH EXTERNAL START SIGNAL. * PROGRAM ENABLE & DISABLE FACILITY. * HOLD/ RESTART FACILITY DURING POWER FAILURE CONDITIONS.

Digital Miniature Timer (2 Digit) in 48 x 48 mm enclosure. The Time range is 0.1 Seconds to 99 Hours, with accuracy better than 0.02%. This Microcontroller based timer has user selectable mode : Delayed ON, Delayed OFF (Interval ON), Cyclic first ON & Cyclic first OFF. In Cyclic mode, ON & OFF time are independently settable to any value from 0.1 Second to 99 Hours. Two Bright RED (0.56� height) LED�s, display the remaining Time (down counting). The output relay has 1 NO/NC contacts rated at 5A/230V AC. Also available with Plug-Socket Adaptor for DIN RAIL mounting.

16 Output programmable controller 16 x 2 Character LCD display Holding and cascading facility Process value retention in case of power failure Dimension : 100 x 75 x 110

2/3 DIGIT TIMER WITH T/W SETTING.

The counters fabricated by our company are widely used in diverse industrial applications. These counters are completely digital and perform optimized counting operations in a fraction of time. They are specifically designed to suit variegated industrial applications and can further be tailored as per the preferences and needs of our clients

Auto timer is a Micro Controller Based Automatic Programmable Switch for switching ON / OFF Water Heaters and other appliances.One can change the program easily according to their needs and appropriate requirements.