SE 702D 12V/20W Body: M= Metal, P=Plastic (Abs), Shape: R= Regular, S= Slim, C= Compact. Note: Special Ballast Modesl for UV Lamp, 5ft. Tubes and customised also available on demand. Salient Features of Electronic Ballast: Voltage Range 100v to 650v/450v as per the model. Works excellent against very low and high voltage and surge and spikes. Comply with EMI & RFI Filters With earthing. (In Metal Body Models). Excellent Lux (Lumens). Works nicely on Genset in Industries. Double the life of the tubes. Moisture proof so no problem in monsoon. Very

* Hard bright nickle plated contacts for high conductivity and longer life * Outer body is powder coated * Pins used in plugs are brass pins * Contacts used in the sockets are phosphor bronze * Available Ratings: o 20 Amps 240 Volts o 20 Amps 440 Volts o 30 Amps 440 Volts * Available as per client's requirements * Fully shrouded live part * Adequate wiring space for neat and quick wiring * Break mechanism is high speed * All units are mechanically interlocked to prevent accidental contact of live parts

Power Sources & control System: The proven 'Parallel Resonant Current Fed' topology is employed to ensure highest degree of reliability and efficiency besides ensuring constant power tracking in a variable impedance load as commonly encountered in an induction Melting cycle. The result is improved load factor and maximum productivity per kVA of utility demand. The converter houses a controlled rectifier converting fixed 50/60 Hz AC voltage to variable DC voltage followed by a DC link reactor that acts as a current source of an inverter, which in turn converts DC to AC of desired frequ

CONSOLE ELECTRONIC BALLAST : - Console Electronic Ballast unlike the conventional ballast, convert 50 Hz 230 Volt AC supply into very high frequency AC voltage to the tune of more than 20000 Hz for lighting up the fluorescent tube. 40% Electricity saving when compared to conventional chokes. Works on very low voltage. No starter required. Instant starting. Fairly constant light output irrespective of variation in supply voltage. More light per Watt, Quiet in operation, Light weight etc.

ADI ARTECH is a preferred name in LOAD CELL & TRANSDUCER technology and it is established in1991 in collaboration with ARTECH INDUSTRIES INC., USA . We have Pressure Transducer to measure pressure in various industrial applications. It is constructed from stainless steel 17 - 4 PH material with Laser Welded environmental protection class IP-68. It is available in range from 50Bar TO 1000Bar with safe overload 100% of rated capacity. It has nominal output 2mV/V with non-linearity +/- 0.25% of FSO. It is easily fitted to the test batch with the help of suitable 1/2" BSP

MF POWER FACTOR COMPENSATION CAPACITOR BANK A set of water-cooled medium frequency capacitors connected by Electrolytic grade copper busbars, to avoid losses, due to high currents. It is fitted inside panel or outside, specially protected frames, automatically compensates the low power factor to the Furnace. ANCILLARY EQUIPMENTS Those Equipments are supplied to specific client’s requirements for a better functionally of the Medium Frequency Furnaces installations: Cooling Tower Step-up & Step-Down Transformers Close loop D.M. Water circulat

FEATURES : * MICRO DRIVE : 40 W TO 400 W. * 1 PH/ 230 V : 0.05 HP TO 3 HP. * 3 PH/ 415 V : 0.45 HP TO 300 HP. * V/F DRIVE. * SENSOR LESS VECTOR CONTROL DRIVE * FLUX VECTOR CONTROL DRIVE. * BOD BUS COMMUNICATION RS-485. * BUILT IN EMI FILTER & PID FEEDBACK CONTROL. * ZERO - SPEED THAT HOLDS THE TORQUE STAY AT ABOVE 150%. * INBUILT PLC FUNCTION. * AUTO ENERGY SAVING FUNCTION. * SPECIAL DRIVE FOR ELEVATOR, ELEVATOR DOOR, CRANE, CNC SPINDLE, FAN & PUMP APPLICATION.

Wetmix Control Panel Panels suitable for any size of wet mix plants (60 tons to 300 tons / hour). The panel complies with CTAB requirement. Water is measured through digital flow meter and cement / filler is controlled through rotary valve/ screw conveyor. Load cell system weighs dry material. Gradation is ensured through variable AC drives of bins. Synchronization ckt maintains exact ratios

Available Brass Meter Parts Brass Terminals Brass Sealing Screws Brass Screw Links Details Material : High grade free cutting brass as per IS 319 (Type 1) BS 249 (Type 1) Finish : Natural/Nickel plated Description : We manufacture the various types of Brass components for Single & Three Phase energy meters.

Your #1 source for Hipot Testers, Electrical Safety Testers, High Voltage Meters, Scanners and Cable Testers, Transformer Testers, Impulse Surge Testers, Megohmmeters and Ground Bond Testers. V4 HIPOT ELECTRICAL SAFETY ANALYZER: Combines AC & DC Hipot with high currentground bond and insulation resistance testing, all in one feature rich, fully automated, easy to use instrument. V5 SCANNING HIPOT/ELECTRICAL SAFETY ANALYZER: The new Vitrek V5 combines AC Hipot to 5KV, DC Hipot to 6KV, insulation resistance to 10 gig-ohms and high current ground bond measure-ment up to 42 Amps and a b

We manufacture a large variety of load cells with capacities and different models. Some of our products are listed below. We also Design, Calibrate & Manufacture Load cells as per Client's specific requirements with minimum period of time.

• Ideal choice for low dewpoint industrial dryer applications • Incorporates advanced Vaisala DRYCAP® Sensor and enhanced auto-calibration software • Long-term stability in low dewpoints • Fast response time • Wide dewpoint measurement range from -60…+60 °C (-76…+140 °F) with an accuracy ±2 °C (±3.6 °F) • Withstands condensation • IP65(NEMA 4) housing provides protection against dust, dirt and splashed water • Can be installed directly into systems at 20 bar maximum pressure • NIST traceable (certificate included) • Compatible with Vaisala DRYCAP® Hand-Held Dewpoint Meter DM70

The eminent manufacturer and supplier of precision components and parts, Emkay Industries is recognized for providing superb precision metal components. Since the inception in this field, we have been striving to design and develop precision component for electronics industry with the main motto of offering quality components to our valued customers. We always endeavor to achieve our set goal of achieving higher productivity, better quality and superior efficiency in the manufacturing of precision components. Our precision components for electronics industry are widely used in telecommunications and electronic devices. We provide comprehensive gamut of services ranging from prototype samples to mass-production, and from technical study, design and fabrication of toolings to manufacturing parts including the secondary processing/treatment.

PLCC SMDs-BI COLOR & TRI COLOR(RGB) make it possible for a single LED to produce two or more colors at one go. like single color PLCC SMD, these SMDs also display excellent thermal dissipation thanks to the built-in heat spreader which maintains temperatures at half that of conventional SMDs, thus adding years to life of SMD why use multiple LEDs when you can do with one? LED Displays manufactured at the CDOT approved and ISO 9001:2000 certified plant of Kwality Photonics Pvt. Ltd. consist of LED Single Digits, LED Dual Digits, LED Multi Digits, LED Alpha numeric display, L

Proportional Temperature Controller We offer proportional temperature controller which are designed to measure, display and control temperature of furnaces over wide range, with high accuracy. Different sensors are used for the desired temperature control range. In proportional temperature controller uses of proportional controller minimizes overshoot and undershoot of the furnace and completely eliminates contact problem associated with relay and contractors. The measured temperature is displayed on a digital LED display. We offer different types of sizes and design as per requirement of

Diligent AC relays are available for Over Load (OL), Single Phasing (SP), Phase Reversal (PR), etc. The overload relays are available in 1ph and 3ph types. 1ph-relays are useful on single phase load and can also used as economical solution for 3 ph applications whenever load is balanced. These are classified depending on the response to the overload condition and the classification is as follows INStantaneous (INS) type. In this relay changes the state as soon as overload occurs. • Time-Delayed (DLY) type. In this the relay changes the state only after elapse of present period

MAINTENANCE FREE EARTHING SOLUTION SAFE EARTHING ELECTRODE (S.E.E.) To have a good earth resistance has always been a problem in soils of poor electrical conductivity. This grounding improvement product is designed to reduce the soil resistivity locally and therefore improve the resistance of the grounding system. Maintenance free safe earthing electrode by utilizing metal alloys and natural chemical compositions, the safe earthing electrode is able to provide a multifaceted proactive earthing protection strategy. The earthing electrode is manufactured from custom-mad

Electronic Cigarette he Electronic Cigarette is made under supervision of China Health Care Society and Beijing Health Care Department with the China Patents. Electronic Cigarette is made from microelectronic control and supercritical atomizing technologies. It looks like a cigar, however there is no tar. It does smoke, however there is no smoking pollution material. You do not need any ignition and fire for smoking it, however it lets you enjoy and satisfy those tactile taste sensations without any risk and dependence on tobacco. It gives you the same feeling of a tobacco cigar or cigarett

HPSV/ MH/ Floor Light Fitting We manufacture and supply a wide range of HPSV/Mh flood light fittings in the global markets. These fittings are manufactured from strict quality control processes in our well equipped manufacturinmg unit. These fitting are used in manufacturing of street lights.