Used as raw materials for manufacturing "ACTIVATED CARBON". Used for manufacturing "BBQ CHARCOAL BRIQUETTE". Used for separation process, refining and solvent collection and Chemical and Food Industry. Used in waste water treatment process. Used in Pharmaceutical and Deodorant Manufacturing Industries. Used as Anti-Pollution absorption. Advantages: Replacing C. P. C. R. P. C. For Low Sulphur Percentage Less requirement of adding desulphuriser in casting process Ready Availability Tax Free Product Eco Friendly Low Cost Coconut Shell Charcoal in S. G. Iron Plants Coconut Shell charcoal for Carbon Pick-Up in S. G. Iron that improves the quality of metal & structural property. It is crushed to various sizes as per requirement. It may be added either to the bottom of ladle before filling with molten metal or to the surface of the bath after the ladles is filled or to the bottom of the ladle after a heel of molten metal has been poured. Also it may be added directly in the furnace. The quantity of Coconut Shell Charcoal to be used is generally 0.5 % to 2.0 % but depends on the extent of carbon to be picked up. Low sulphur presence reduces the use of Desulphuriser. It is used for Carbon Pick-up in S. G. Iron castings to overcome the problem of Carbon deficient metal scrap. It is also used as a replacement for Calcined Petroleum Coke. Yield obtained is about 75-80 % hence increases quality production of castings.

coconut shell charcoal and high bulk density make this raw material more suitable for manufacturing superior grades of activated carbon by steam activation. Because of low ash and better process controls the production yield is attractive.

Biomass briquette 90 mm made by agro waste material with calorific value more than 4200 cal. For any further information feel free to contact us.

we manufactures and supplies shell charcoal. The product we have is of high heat value and it is smokeless. 1.fixed carbon. above 75%-80%. 2.volatile matter 10% maximum. 3.ash content 2% maximum 4.moisture 10% maximum. 5.colour - uniformly black. 6.loi loss 22% maximum. 7.packing - 25 kgs or 50 kgs new poly bags.

We offer Biomass Briquette. Biomass Briquettes: Non-conventional Source of energy, Eco-friendly, Renewable in nature, non polluting and economical. It's made through binder less technique without use of any type of chemical so it is 100% natural. Raw Material: Sugarcane Bagasse, Saw Dust, Groundnut Shell, Forest waste, Coconut Charcoal, etc. Moisture: Less than 5%. Sulpher: 0%. Carbon: 60%. Ash: 5%. High specific density: 1200 Kg/m3, Bulk density: 800 Kg/m3. Price Ex-Factory: Call Biomass Briquette is an Ideal Fuel Due to: Eco friendly & Renewable Energy fuel. Economical and cheaper than other solid fuels i.e., coal & wood. Higher thermal calorific value around 4500 Kcal/Kg. Pollution free because there is no sulfur or any hazardous material. Lower ash content 2 to 5%. There is no fly ash when burn. Consistent high burning efficiency due to the low moisture. Contain high density & Higher Fix Carbon value. Easy for Transportation, feeding & combustion due to unique shape. Combustion is more uniform compared to other coal. You can contact us if you want to order this product.

Activated charcoal is an amorphous form of carbon thus it has no regular atomic structure, unlike the other forms of elemental carbon. We manufacture and supply high quality activated carbon by burning wood, nutshells, coconut husks, animal bones, and/or other carbonaceous materials. The charcoal is used in water filtration processes, treatment of poisoning as well as is often included in filters. This can be availed by us at best market prices and in various weights as per the client's requirement. For further inquiry contact us at the given address. Features: * Raw material: Wood / nutshells / coconut husks / animal bones / other carbonaceous materials * Used in: Water filtration / treatment of poisoning / filters / trapping other carbon-based impurities * Industries it caters to: Metallurgy / sewage treatment * Weights: 25 kg / 50 kg / 500 kg (Custom weights on request) * Used to adsorb odorous or colored substances from gases or liquids * Has no regular atomic structure

Export grade coconut shell charcoal in granular form with size range of 2x4, 3x6, 4x8, 6x12, 8x16, 16x40, can supply as per the buyer interest. Product specification: Moisture: 5% Max Ash: 1. 5% Max Volatile: 13% Max Carbon: 80. 5% Min This specification is proved in a lab. We can provide the test report also. The actual product quality will be more than the specified since, we are manufacturing with our own technology.

we have good quality of natural raw coconut shell charcoal.

Our Carbonised Coconut Shell Charcoal is manufactured by burning shells of fully matured Coconuts with limited supply of air, sufficient only for carbonisation, but not for complete destruction. To obtain good quality charcoal we use fully dried, clean, mature shells. Our raw materials are carefully selected and processed under stringent quality control. Specifications Moisture content - 7% Ash - 2.5% Volatile matter - 19% Residual carbon - 75% Available Sizes - 1) Chips (0~80mm) 2) Granules (2x6,6x8,8x30) Inspection : By third party International Inspection agency like S. G. S, Caleb Brett etc at factory/Loading port for Quality and Quantity analysis is final and it binds all parties involves in the transaction.

Specifications: * Shape: Irregular shapes * Nominal Across Dimension: 20.00 mm * Moisture Content: Below 5.00% * Dust / process Impurities: Below 6.00% * Supply Condition: Charcoal will be in loose condition & will be directly loaded in Container. Approximate maximum capacity: 20 MT / 40' Container.

1) For Natural Charcoal Carton Size : 30 x 30 x 50 cm Weight per Carton : Around 18 Kgs 2) For the Machine Extruded Charcoal (Briquette) 120 pcs of Briquette per Carton Box. (Each briquette has 4.5cm of diameter, 5.8 cm of length roughly) Weight per Carton : Around 10 Kgs (when packaged 120 pcs of Briquette)

Wood Charcoal Charcoal is the blackish residue consisting of impure carbon obtained by removing water and other volatile constituents of animal and vegetable substances. It is usually produced by heating wood in the absence of oxygen, but sugar charcoal, bone charcoal (which contains a great amount of calcium phosphate), and others can be produced as well. The light, black, porous material is 85% to 98% carbon, and resembles coal.

Our product Charcoal is obtained from the blackish residue that consists of impure carbon compounds after removing water and other volatile constituents. These constituents belong to vegetable and animal substances ands is usually derived by heating wood in the absence of oxygen. Features: • Has great resemblance with coal and contains 85% to 98% carbon. • This substance is brittle, porous and black in color.

Fly ash is a fine, glass powder recovered from the gases of burning coal during the production of electricity. These micron-sized earth elements consist primarily of silica, alumina and iron. When mixed with lime and water the fly ash forms a cementitious compound with properties very similar to that of Portland cement. Because of this similarity, fly ash can be used to replace a portion of cement in the concrete, providing some distinct quality advantages. The concrete is denser resulting in a tighter, smoother surface with less bleeding. Fly ash concrete offers a distinct architectural benefit with improved textural consistency and sharper detail. Fly Ash is also known as Coal Ash, Pulverized Flue Ash, Pozzolona.