Flush Bottom Valve Assured Performance, reliability and safety. Hi-Tech offers the most comprehensive fully Lined Valve range in PFA, FEP, ETFE, PVDF, PP or HDPE to provide Complete Solution to CPI and related industries for their Corrosion problems. The range includes: Ball Valves (Integral Ball-Glandless Design). Max.10" NB Plug Valves (Two way and jacketed Design). Max. 8" NB Butterfly Valves (Wafer and Lug type Design). Max. 20" NB Diaphragm Valves (Weir type). Max. 8" NB Flush Bottom Valves. Max. 6" X 4" NB Glob

Material - SS, Alloy, Steel Nickel based alloy, Duplex material. We can produce all variety of control valve casting

Bronze Steam Stop Valve Product Bronze Steam Stop Valve Press Class Rating max bop 250 PSIG 428° F Body Material Cum Standard Bronze IBR Clause 282 (a) (IV) GRB Product Description Screwed in bonnet inside screw rising stem Trim 13% Cr SS End Detail Screwed female BSP taper thread to BS - 21 Test Pressure Tested to 500 PSIG (Hydro) Size : Inches: 1/2, 3/4, 1, 1 ¼, 2. Millimeters: 15, 20, 25, 32, 40, 50. Application : Water Steam Oil

Material : forged and stainless steel sizes: 1/2" to 2" NB ­ Class 150-2500# In CS/AS/SS

Lined Ball Valve (Design-2)

We are trader and exporter of valves. Thay are available in various varieties.

SIZES : NG-6 / NG - 10 / NG - 16 / NG - 25 / NG - 32 / NG - 50 . (ALL CETOP MOUNTING) PRESSURE : UPTO 315 BAR. FLOW : UPTO 1000 LPM. VOLTAGE : 220 VAC / 12 VDC / 24 VDC OTHER VOLTAGES ON REQUEST.

BODY: DI / WCB / CI, CF8M, CF8 LINING: FEP / PFA, LINING THICKNESS: 3. 5 MM MINIMUM DIAPHRAGM: PTFE BACKED BY NEOPRENE PAD TESTING: PRESSURE: HYDORO TESTED Up to 3"size Valve: 10 KG / Cm2, For 4" & 6 " Valve: 6 KG / Cm2 SPARK TEST: 15 KV SIZES AVAILABLE: REGULAR TYPE: 15NB (1 / 2") to 150 NB (6") END CONNECTION: Flanged End connection OTHER SIZES AVAILABLE: F to F Distance AS PER CUSTOMER REQUIREMENT

'WJ' Bronze Sleeve Packed Water Level Gauge flanged to Table 'H' or Screwed male ends with BSP Taper Threads and with automatic shut off in the water arm. Suitable for 250 PSIG (17.58 Kg/Cm 2 g) Max. B.O.P. and Max. temp. upto 428 o F (220 o C) Tested to 500 PSIG (35.15 Kg/Cm 2 g) Hydraulic pressure.

VALVES / VALVULAS Valves are nitrided to increase the exhaustion strength, Chrome plated to increase the wear resistance and Stellited (Seat hard Faced) to get high hot hardness at the seat. VALVE GUIDES / GUIAS DE VALVULAS The guides are usually made of cast iron by casting process. Sometimes, shoulder bushes are provided to position the guide in cylinder head. The Valve-Guides are also available in Brass material for certain applications. VALVE SEATS / ASIENTOS DE VALVULAS These are produced by centrifugal cast process to obtain closed grain dense structure to meet their functional

BALL VALVE

Heavy Duty of Forged Brass Gate Valves.

General Information : Pressure Relief Valve is a safety element of the transformer employs to prevent heavy damages of the tank in the case of sudden rise of the internal pressure. These Valve have been designed in order to remove the excess pressure in a very short time as soon as the pressure in the tank rises above predetermined safe limit the valve operates and allow the pressure to drip instantaneously, it avoids damage to transformer body. Operating : The PRV’s port is sealed with viton ‘O’ ring and sealing cap, kept sealed by stainless steel rod & stainless steel spring. The sealing cap is exposed to tank pressure, whenever same pressure rises due to any reason, the same pressure acts on the sealing cap from inside. When pressure rises above predetermined safe limit, the sealing cap gets lifted from its seat. This lifting is instantaneous and allows vapors, gases or liquid to come out of tank. The sealing cap regains its position as soon as pressure in the tank drop below the set limit. Model T-10 · Removes excess pressure quickly · Can be preset to any value within 0.15 and 0.7 bar (value is stamped on the body of the bar - Tolerance of the presetted value : +/- 0.05 bar · Viton Sealing ring. · Special design of the steel spring and centre rings to ensure a safe and steady service and a long life . Short tail with 1" BSP thread for easy location in any portion of the cover Model T-10 Model S-16 Model S-3 S-3 & S-

Working Parts, Screwed Female NPT / Socket Welding ends. Tested to 3000 Psig. Hyd. Reduced Bore : 10mm to 50mm Standard Bore : 10mm to 40mm

Cast Iron Ball Valve With S.S Ball and stem (A.I.S.I. 304) blowout proof stem and full bre design. Available in 15mm, 20mm, 25mm, 32mm, 40mm, 50mm, 80mm, 100mm sizes.

Globe Valve Construction: Bolted Bonnet, Outside screwed rising spindle. Body Materials: Forged Carbon Steel. Trims: Stainless Steel End Connection: Flanged IS/BS/ASA/DIN Manufacturing Standard: API 600/BS 1414 Pressure Class: ASA Class 150, Class 300, Class 600/DIN: ND-16,ND-40,ND-64,ND-100 Sizes: 50 mm to 600 mm Other Features: Gear operation, By-Pass arrangement, Head-Stock with extension spindle, Motor actuation, Flexi wedge.

Valves

Ball Valves: Technical Data: Note: All Dim. are in mm "in inches.